The Two-color infrared Handheld pyrometer is primarily used in the metallurgical industry to measure the temperature of steel or molten iron, wire, rod, and hot-rolled steel.
The pyrometer can “look” into a process and measure the target temperature from a distance, providing an accurate reading while eliminating problems associated with contact measuring devices. The use of dual infrared wavelengths overcome application challenges such as small targets, variable emissivity, dust, water or other interfering media between the target and the pyrometer.
Accurate temperatures are obtained even when the target is 95% obstructed. Target emissivity is calculated by the pyrometer eliminating the need for the user to know and enter an emissivity value.
- Slab / Billet / Bloom
- Thin Slab / Tunnel Furnace
- Thin Strip
- Furnace Exit
- Hot Strip / Plate Mill
- Long Products Rolling
- Pipe and Tube
- Wire / Rod
- Heat Treatment Furnace
- Forging
- Red aiming laser
- Data Logging – 1000 data point internal memory with date/time stamp
- RS232 serial port communication
- Back-lit 48*84 liquid crystal display
- User selectable Celsius or Fahrenheit measurement
- User selectable upper and lower limit alarms
- Accuracy: ±0.5% full scale
- Response time: <100ms
- Single or dual wavelength mode selectable
- User selectable emissivity for non steel applications
- 4 sampling modes real-time, maximum temp, minimum temp and average temp
- Non-contact temperature measurement.
| Operating Temp: | 0˚C to +50˚C (32˚F to +122˚F) |
| Accuracy: | 0.75% |
| Repeatability: | 0.1% ( ±2°C) |
| Response Time: | 100 ms. |
| Measurement Range: | 700°C to 1600°C (1292°F to 2912°F) |
| Display Mode: | LCD with backlight. Display peak, valley, average or real time options |
| Alarm Output: | Adjustable high or low temperature alarm shows on display and output via RS232 |
| Housing: | Cast aluminum enclosure |
| Size Weight: | Enclosure: 230 mm L x 200 mm H x 70 mm W (9”L x 8”H x 2.75W). 1.8Kg (4 lbs) |
| Laser aiming: | Visible aiming laser, wavelength 650nm±10%, Power≤3mW, safety rating IIa |
